Construction Tools

The Fourmost Hinge Slotter cuts to the center of 4 of the most common size thicknesses of balsa wood sheet 3/32 inch, 1/8 inch, 3/16 inch and 1/4 inch. To adjust, simply match the depth guide to your sheet thickness, insert the blade, and secure the screws. Slotting is acheived by carefully running the slotter along the sheet using the depth guide as a fence.

The Miter Cut allows the craftsperson to make accurate cuts in both wood and plastic.

The Miter Cut uses single edge razor blades. The adjustable fence swings through an arc of precise degree marks with a positive stop at 90 degrees. This allows the modeler to make accurate repeatable cuts for tight fits on mitered corners.

The Miter Cut is an excellent tool for many hobby requirements including:

• Model Airplane and Ship parts
• Model Railroad and train Layouts
• Miniatures - Furniture and Picture Frames
• Mitered joints on rubber trims and moldings such as the Fourmost Window Flange and the Canopy Trim

The Miter Cut is made in the United States from alder wood and glass filled nylon.

The Miter Saw allows the craftsperson to saw very accurate angles.

The Miter Saw is a hardened steel razor saw that travels within a precision guide allowing the craftsman to make accurate cuts in wood, plastic and metal.

The adjustable fence swings through an arc of precise degree marks with a positive stop at 90°. This allows the modeler to make accurate repeatable cuts for tight fits on mitered corners.

The Miter Saw is an excellent tool for many hobby requirements including:

• Model Airplane and Ship parts
• Model Railroad and Train Layouts
• Miniatures - Furniture and Picture Frames

The Miter Saw is made in the United States from alder wood and glass filled nylon.

The Miter Sander allows the craftsperson to sand very accurate angles. Perfect for truss construction, any angle and its complement can be sanded easily and accurately using the Miter Sander.

The adjustable fence swings through an arc of precise degree marks. This allows the modeler to make accurate repeatable angles for tight fits on mitered corners. The sanding block comes with two different grits of replaceable sandpaper.

The Miter Sander is an excellent tool for many requirements including: model airplane and ship parts, model railroad and train layouts, miniatures and doll houses.

The Miter Sander is made in the United States from alder wood and glass filled nylon.

• Length – 12 inches

• Soft rubber backing holds fast while cutting or trimming iron-on film or fabric

• Will not mark material

• Perfect for use on fiberglass cloth

• Ends the frustration of wandering cuts and lines

The Fourmost Glue Caddy is a glue resistant polypropylene tray that securely and conveniently holds CA glue bottles and 3 oz. Dixie cups. The Glue Caddy holds glue bottles upright helping to prevent the tips from clogging and the bottles from spilling onto the workbench. The Glue Caddy fits most CA glue bottle sizes. The portable Glue Caddy is ideal for mixing epoxy as well as sorting, organizing, and storing small parts.